Senders

1810Features:Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800 - can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue …
$109.94
1811Features:Accurate - used with the Vessel Systems Monitor VSM 422 PN 1800-can be precisely calibrated for each tank* Reliable - SSI Technologies, Inc. Fluid-Trac® is non-contacting eliminating any mechanical moving parts that can wear and cause intermittent or complete signal loss Digital filtering - Eliminates errors due to liquids sloshing in mobile tanks * Calibrated for use with Blue Se…
$109.94
1800Features:Three intuitive display modes Flexible case design offers three mounting options Fully programmable legends and adjustable alarm functions can be customized to fit every boat Monitors DC systems-voltage, amperage, battery state of charge - amp hours remaining, time remaining, % charge, battery temperature (alarms for all values) Monitors AC systems-voltage, amperage, watts, frequency …
$339.96
Ambient Air Temperature Probe (-20°C to 80°C or -4°F to 176°F)
$22.17
Ambient Air Temperature Probe (-20°C to 80°C or -4°F to 176°F)
$22.17
Exhuast Gas Temperature Probe (0°C to 900°C or 32° to 1652°F)
$116.75
Exhuast Gas Temperature Probe (0°C to 900°C or 32° to 1652°F)
$116.75
Fuel Flow MonitorPart #: FFM100-01Maretron's FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy. In fact, the accuracy of the FFM100 is nearly that of commercial vessel systems costing tens of thousand…
$357.48
Fuel Flow MonitorPart #: FFM100-01Maretron's FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy. In fact, the accuracy of the FFM100 is nearly that of commercial vessel systems costing tens of thousand…
$357.48
Fluid Pressure MonitorMaretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000r network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000r compatible displays. With the appropriate transducer, the FPM100 reports either pressure or vacuum for a variety of a…
$357.48
Fluid Pressure MonitorMaretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000r network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000r compatible displays. With the appropriate transducer, the FPM100 reports either pressure or vacuum for a variety of a…
$357.48
FPT Cooling Water Flow Switch - 1"Maretron's 1" FPT Cooling Water Flow Switch is an accessory for the SIM100 Switch Indicator Module. It has a set of normally closed contacts that will open whenever a flow of cooling water of a user-settable amount is detected.
$70.59
FPT Cooling Water Flow Switch - 2"Maretron's 2" FPT Cooling Water Flow Switch is an accessory that works with the SIM100 Switch Indicator Module. It has a set of normally closed contacts that will open whenever a flow of cooling water of a user-settable amount is detected.
$76.02
FTP Cooling Water Flow Switch - 1-1/2"Maretron's 1-1/2" FTP Cooling Water Flow Switch is an accessory for the SIM100 Switch Indicator Module. It has a set of normally closed contacts that will open whenever a flow of cooling water of a user-settable amount is detected.
$74.21
Fuel Flow Sensor 20 to 200 HP (0.53 to 26.4 GPH, 2 to 100 LPH)
$357.48
Fuel Flow Sensor 20 to 200 HP (0.53 to 26.4 GPH, 2 to 100 LPH)
$357.48
Fuel Flow Sensor 1000 to 3000 HP (180 to 1500 LPH, 48 to 396 GPH)
$628.98
Fuel Flow Sensor 200 to 1000 HP (4 to 132 GPH, 15 to 500 LPH)
$447.98
Fuel Flow Sensor 200 to 1000 HP (4 to 132 GPH, 15 to 500 LPH)
$447.98
Immersion Probe for Tanks or Plenums (-20°C to 80°C or -4°F to 176°F)
$55.65
Immersion Probe for Tanks or Plenums (-20°C to 80°C or -4°F to 176°F)
$55.65
MS-1075 Magnetic Switch Recessed for Indoor/OutdoorApplications:3/8" press-fit mountingNo screws or glue neededHeavy-duty housing resists crushingSpecifications:
$4.53
MS-1055-N Magenetic Switch Cylinder for Indoor/OutdoorApplications:EconomicalVersatileFits in limited spaceSpecifications:ABS Plastic EnclosureIP67Natural colorHermetically sealed reed switch encapsulated in polyurethane
$4.53
MS-1085-N Rectangular Magnetic Switch for OutdoorsApplications:Convenient surface mountingMounting screws includedSpecifications:ABS Plastic EnclosureIP67Hermetically sealed reed switch encapsulated in polyurethane
$7.42
Pressure Transducer 0 to 3 PSI - for the FPM100 Fluid Pressure Monitor
$134.85
Pressure Transducer 0 to 3 PSI - for the FPM100 Fluid Pressure Monitor
$134.85
Pressure Transducer 0 to 5 PSI - for FPM100 Fluid Pressure Monitor
$134.85
Pressure Transducer 0 to 5 PSI - for FPM100 Fluid Pressure Monitor
$134.85
Rectangular Magnetic Switch for IndoorThe 1035 Series magnetic contact saves installation time through the use of a specially formulated 3Mr adhesive tape. The tape, which establishes a permanent bond between the contact and the surface, can be repositioned during the first 5 minutes. A low profile and small footprint combinewith reliable technology to make the 1035 Series the perfect magnetic con…
$5.88
RIM100 Run Indicator ModulePart #: RIM100-01Maretron's Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000 network, whether or not the electrical circuit is energized and running. The RIM100 works equally as well for monitoring manually switched loads (running lights, anchor lights, or deck lights) as it does for automatically switched loads. Monit…
$266.98
RIM100 Run Indicator ModulePart #: RIM100-01Maretron's Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000 network, whether or not the electrical circuit is energized and running. The RIM100 works equally as well for monitoring manually switched loads (running lights, anchor lights, or deck lights) as it does for automatically switched loads. Monit…
$266.98
SIM100 Switch Indicator ModuleMaretron's Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (heat, smoke, carbon monoxide, explosive vapor detectors), security systems (motion, vibration, glass break, door and port hole magnetic switches), and vessel monitoring equipment (valve closed/open, high water bilge). The SIM100 continually monitors…
$357.48
SIM100 Switch Indicator ModuleMaretron's Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (heat, smoke, carbon monoxide, explosive vapor detectors), security systems (motion, vibration, glass break, door and port hole magnetic switches), and vessel monitoring equipment (valve closed/open, high water bilge). The SIM100 continually monitors…
$357.48
The TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with the DCM100). This probe ends in a ring terminal and can be used to measure battery temperature or any other under-bolt temperature. The temperature range is -4 deg. F to 176 deg. F (-20 deg C to 80 deg C).
$19.01
The TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with the DCM100). This probe ends in a ring terminal and can be used to measure battery temperature or any other under-bolt temperature. The temperature range is -4 deg. F to 176 deg. F (-20 deg C to 80 deg C).
$19.01
Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20 deg. C to 80 deg. C or -4 deg. F to 176 deg. F) cover a wide range of applications including cabin air temperature, engine room air temperature…
$266.98
Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20 deg. C to 80 deg. C or -4 deg. F to 176 deg. F) cover a wide range of applications including cabin air temperature, engine room air temperature…
$266.98
Vacuum SwitchMaretron's Vacuum Switch detects when a vacuum goes over 7" Hg (3.4 PSI or 0.237 bar). When connected to a fuel supply, this corresponds to the excess vacuum required when filters are clogged.
$70.59
Water In Fuel DetectorPart #: WIF-RK30880-EA WIF-RK30880-E Fuel detector mounted on the bottom of a fuel filter will provide a voltage when water is detected in the fuel. This voltage can be detected by the RIM100 and used to trigger an Alert or display an Indicator.
$116.75
Water In Fuel DetectorPart #: WIF-RK30880-EA WIF-RK30880-E Fuel detector mounted on the bottom of a fuel filter will provide a voltage when water is detected in the fuel. This voltage can be detected by the RIM100 and used to trigger an Alert or display an Indicator.
$116.75