Hydraulic pumps and Parts

High quality tank, supplied with return filter, temp. gauge, suction connection and manifold (for up to 5 control devices) with 1 pre-mounted HT1013 valve.Single step load sensing device, 24 Volt. Gives zero or full flow rate, depending on whether a load is sensed or not. Used for e.g. bow and stern thrusters.
$3,292.99
Dual step load sensing device, 24 Volt. Gives zero, partial or full flow rate, dependant on load sensed. Used for e.g. bow and stern thrusters.
$1,653.01
Control unit for anchor windlasses, with speed adjustment in both directions for optimum veer/haul chain rates. 12 V version is available by special order.
$593.82
Manifold for five additional solenoid control units. Supplied with blanking plates and extension electrical connection box.
$1,673.49
Dual step load sensing device, 24 Volt. Gives zero, partial or full flow rate, dependant on load sensed. Used for e.g. bow and stern thrusters.
$887.94
Control unit for anchor windlasses, with speed adjustment in both directions for optimum veer/haul chain rates. 12 V version is available by special order.
$942.85
A 12 Volt version of this solenoid control unit is available by special order.
$376.02
Solenoid control unit with counterbalance. For numerous applications, e.g. mast lowering or hinged radar support. 12 V version available by special order.
$1,734.92
Priority valve solenoid control unit for Vetus power steering or an inboard autopilot. A 12 Volt version is available by special order.
$2,540.95
Hydraulic low noise load sensing pump for installation on propulsion or auxiliary engines. Cast iron body with SAE-B flange and rear connections.
$3,062.17
Hydraulic low noise load sensing pump for installation on propulsion or auxiliary engines. Cast iron body with SAE-B flange and side connections. Capacity (cc) 30 or 45 cc (1.83 or 2.75 cu.inch). Sense of rotation Right handed. Connections SAE-B flange, 13 spline shaft. Sideconnection for suction and pressure.Fits Twindisc gearboxes. Max. speed (RPM) 3600
$3,062.17
Hydraulic low noise load sensing pump for installation on propulsion or auxiliary engines. Cast iron body with SAE-B flange and rear connections.
$3,237.38
Hydraulic low noise load sensing pump for installation on propulsion or auxiliary engines. Cast iron body with SAE-B flange and rear connections.
$3,237.38
Hydraulic low noise load sensing pump. Cast iron body with SAE-B flange. Right handed.
$3,237.15
Hydraulic low noise load sensing pump for installation on propulsion or auxiliary engines. Cast iron body with SAE-B flange and side connections. Capacity (cc) 30 or 45 cc (1.83 or 2.75 cu.inch). Sense of rotation Right handed. Connections SAE-B flange, 13 spline shaft. Sideconnection for suction and pressure.Fits Twindisc gearboxes. Max. speed (RPM) 2800
$3,237.38
Hydraulic low noise load sensing pump for installation on propulsion or auxiliary engines. Cast iron body with SAE-B flange and rear connections.
$5,241.05
Hydraulic low noise load sensing pump for installation on propulsion or auxiliary engines. Cast iron body with SAE-B flange and side connections.Capacity (cc) 62 cc (3.78 cu.inch). Sense of rotation Right handed Connections SAE-B flange, 13 spline shaft.Side connection for suction and pressure.Fits Twindisc gearboxes. Max. speed (RPM) 2880
$5,241.05
Hydraulic low noise load sensing pump for installation on propulsion or auxiliary engines. Cast iron body with SAE-C flange and side connections.apacity (cc) 75 cc (4.57 cu.inch). Sense of rotation Left handed. Connections SAE-C flange, 14 spline shaft.Side connection for suction and pressure.Fits Twindisc gearboxes. Max. speed (RPM) 2880
$5,065.84